简体中文
English
Deutsch
Français
Italia
Español
Português
العربية
Русский
Nederlands
The steps are as follows. Choose “MAINTE” Input “5”to User and “2222”to Password Choose “PARAM” Choose “AX.SV” Choose 70038,then input “2”to “S1” Choose “AXIS BASE”,th...
The steps are as follows. Choose “MONITOR”,then choose “FILE”,choose a file you need Press “JOG”,then move spindle by press “X”、“Y”、“Z” Press”MPG”,then turn handwheel Choose “...
The steps are as follows. Turn the black button The video is as follows.
The steps are as follows. Confirm safe height Press “IHS TEST” The video is as follows.
The steps are as follows. Turn the red button,press the green button The video is as follows.
The steps are as follows. Press “START” Press “Enter” Press “F5”to increasing CutSpeed Press “F4”to decreasing CutSpeed The video is as follows.
The steps are as follows. Through press the up, down, left and right key to move The video is as follows.
The video is as follows.
The steps are as follows. Press “F1” Through press the up, down, left and right key to choosing graphics Press “F8” Through press the up and down key to adjusting the size you want to adjust Through press the number keyto inputting size valu...
The steps are as follows. Press “X”to enter the interface of inputCutSpeed Through press the number keyto inputting the numerical Through press left and right key and “Del”to scaled down Press “ENTER” The video is as follows.
The steps are as follows. Turn the white button near the ammeter to adjust the current The video is as follows.
The steps are as follows. Press “MENU” Through turn the “IHS Height”to adjusting “Actual ARC Voltage” Through turn the “ARC Voltage”to adjusting “Setting ARC Voltage” The video is as follows.
The steps are as follows. Press “Arc” The video is as follows.
The steps are as follows. Press”RUN/PAUSE/DELETE”,choose “Internal File” For example,we select the file named “SONIC.TXT”, Enter”start speed setting”interface change “Speed Scale” from 0.8 to 0.1 ...
The steps are as follows. Press”TOOLSET”button,the Z axis will move down to the tool sensor. When the tool touch the tool sensor,the tool sensor will up 10mm. The thickness of tool sensor is 10mm.So the data of Z axis is 20. PRESS “X/Y&rar...
Whatsapp
Chat online
E-Mail
