Subsidiary Equipment of furniture production line
The main production equipment of the panel furniture production line includes a variety of numerical control equipment. It has a CNC cutting machine, edge banding machine, side hole machine, laminating machine, polishing machine, and so on. Each machine has its processing function. The cutting machine is mainly to cut the board, punch, and groove. Generally, the design of various cabinets is very convenient through the design of intelligent software. You can use the edge banding machine for edge banding after the various shaped boards are cut. So the processed sheet is more beautiful. The side hole machine has the side hole punching function, such as various alloy holes and wooden pin holes. After carving and cutting, grinding, and polishing, we need to place the cabinet door in the laminating machine for vacuum lamination. The whole process is fast and convenient by spraying and drying with high-gloss films and skin-sensitive films. These equipment have a common feature is a high degree of automation and high production efficiency. Each device cooperates to meet the user's individualization and diverse processing needs.
Vacuum Press Machine
Vacuum press machine is a special equipment for paper and film. In terms of function, we can divide it into two types: instant coating film laminating machine and pre-coating film laminating machine. The instant coating film laminating machine includes three parts such as gluing, drying, and hot pressing. It has a wide range of applications with a wide application range and stable and reliable processing performance. Pre-coating vacuum press machine, without gluing and drying parts, with the features of small size, low cost, flexible and convenient operation, it is not only suitable for laminating processing of large quantities of printed matter, but also for small batches of scattered printed matter such as automated desktop office systems machining.
Side drilling machine
The side hole machine is a practical numerical control equipment for plate furniture. It is mainly used to solve the problem that the CNC opener cannot punch side holes. And the precision of ordinary pneumatic row drills is not high, and needs repeated positioning. This side hole machine is simple and practical, and various hole position modes can be selected at will. It uses the radar sensor to sense, and hits the hole. Workers can easily operate this machine without special training. Really getting rid of the dependence of traditional processing methods on workers, which not only reduces labor costs, but also improves efficiency, while avoiding waste caused by manual errors. Therefore, this type of side hole machine is very suitable for small and medium plate furniture processing.
