Laser wood engraver machine precautions
Author: Jack; Last Modify: Jun 20, 2019
-
-
-
-
-
-
-
- Observe the instruction manual of the laser engraving machine and start the equipment strictly according to the requirements.
- Operator must be trained by the laser engraving machine manufacturer before they can be employed.
- Wear necessary protective equipment, such as protective glasses when processing materials.
- Refuse to use laser for irradiation and processing before the processing materials are clarified.
- When the laser engraving machine is running, there must be a full-time staff present. If you need to leave, you should turn off the equipment.
- There must be easy to get fire extinguishers and other equipment near the laser cutting machine.
- During the processing, if abnormal conditions are found, it should be stopped immediately, and then contact the professional technician to test.
- After use, the laser engraving machine equipment must be cleaned in time to prepare for the next processing.
- Regular inspection of nozzles, auxiliary gases and other consumables
- When the laser engraving machine is working, you should pay attention to observe whether there is any abnormality in each detail of the machine.
