Three core components of laser marking machine

The quality of the accessories directly affects the service life of the laser  marking machine, so learn the core components of the laser marking machine is to better use the machine.

1. Laser generator
Laser is the most core component of laser marking machine. The quality of laser directly determines the marking effect and service life of laser marking machine.
At present, the imported brand IPG is the most well-known in the laser market. However, if it is used in laser marking machines for small power fiber lasers, domestic laser Ruike is also the choice of many users. In addition, Chuangxin and Suzhou Huabida are also common.

2. Galvanometer
The galvanometer is also an important part in the laser marking machine. It consists of the controller and the vibration lens. The vibration lens is composed of the stator, the rotor, and the detection sensor.
The laser marking machine relies on the cooperation of X, Y deflection to reflect light onto the work surface for accurate engraving. Galvanometer control is controlled by a computer in an open loop. Therefore, it must be linear, that is, the linear relationship between the input signal and the deflection angle.
Because the galvanometer is a fast and precise machine, it is required to increase the acceleration from one working state to the other working state, the better. In this way, the laser marking machine has an infinitely short time for marking. Therefore, the quality of the galvanometer will affect the processing speed and accuracy of the laser marking machine.

3. Marking software
The control software of the laser marking machine is just like the human brain. It is the window for the user to control the marking machine. It should have rich and perfect mapping functions, many user support software and a trendy development direction. Chinese information ability.
At present, there are many types of software for laser marking machines in the market. Some powerful laser marking machine manufacturers use independently developed software, and some small laser marking equipment manufacturers use conventional software such as EzCAD.

The above are the three core components of the marking machine that we are going to talk about today. If you want to know other knowledge about the marking machine, please leave a message for me.