简体中文
English
Deutsch
Français
Italia
Español
Português
العربية
Русский
Nederlands
The steps are as follows. Press “Handle”,then turn the handwheel to adjust position When tool touch surface of workpiece Press “F6”,then press “F5”,for all axes go back to zero Press “Jog”,then press “Z+” ...
The steps are as follows. Press “Handle” Please remember these parameters Press “Parameter”，then press “F2”，press“F5” Choose “4524 X-axis ”，input “026” Choose “4525 Y-axis”，inpu...
The steps are as follows. Press “Handle” Press “Parameter”,then press “F2” Choose “3023”，then press “Enter”,input “408” Choose “3024”,then press “Enter”,input “273&...
The steps are as follows. Press “Parameter” If you want change parameter4505, press “F2”Manufacturer,input system password “FYRQ” The video is as follows.
The steps are as follows. Turn the red emergency button on the right Press the green button Turn the red emergency button on the left The video is as follows.
The steps are as follows. Press “Handle” Turn the left button of handwheel,for adjusting to the axis you want to change Turn the right button of handwheel,for adjusting moving speed Turn the button below of handwheel,for moving axis The video ...
The steps are as follows. Press “Jog” Press “Y+”、“Y-”、“X+”、“X-”、“Z-”、“Z+”,for move position Press “5”，for switching high and low speed Press “Y+&rd...
The steps are as follows. Press “Program” Choose a file you want,then press “F1” Press “State” Press “Auto”,then press “F1” Press “Start” Turn the handwheel to adjust position Press “...
The steps are as follows. Insert U disk Press “Program”,then press “B” Press “F6”,for copy and delete Choose a file you want,then press “F1” Press “F6”,for copy to local Press “A”,for view lo...
The steps are as follows. Press “Advanced”,choose a tool you want Press “=” Press “Auto”,then press “F1” Press “State” Press “Advanced”,choose a tool you want Press “F1” Press &...
The steps are as follows. Press the red emergency button on the left,then E-stop Turn the red emergency button on the left Press “F2”,for Selective Mach,then input 210 to BCF Pos(S) and choose FileEnd(P) Press “K1”,for starting the brush Pre...
The steps are as follows. Press green button and unplug shank Press green button and install shank The video is as follows.
The steps are as follows. Press “Advanced”,then press “C” Press “Auto”,then press “F7” Change tool from 8 to 1 Tool change is completed The video is as follows.
The steps are as follows. Press “System” Press “C” Press “F3”,for select the language by the arrow key Then restart the system according to the screen instruction Press the red emergency button on the right Then turn the red em...
The steps are as follows. After Power on,all axis should back to “home”(REF point) Press “REF Point” Press “F7” If back to home sign occurs, the back to home succeeds The video is as follows.
Whatsapp
Chat online
E-Mail
